---
description: Typst's tutorial.
---

# Writing in Typst
Let's get started! Suppose you got assigned to write a technical report for
university. It will contain prose, maths, headings, and figures. To get started,
you create a new project on the Typst app. You'll be taken to the editor where
you see two panels: A source panel where you compose your document and a
preview panel where you see the rendered document.

![Typst app screenshot](1-writing-app.png)

You already have a good angle for your report in mind. So let's start by writing
the introduction. Enter some text in the editor panel. You'll notice that the
text immediately appears on the previewed page.

```example
In this report, we will explore the
various factors that influence fluid
dynamics in glaciers and how they
contribute to the formation and
behavior of these natural structures.
```

_Throughout this tutorial, we'll show code examples like this one. Just like in the app, the first panel contains markup and the second panel shows a preview. We shrunk the page to fit the examples so you can see what's going on._

The next step is to add a heading and emphasize some text. Typst uses simple
markup for the most common formatting tasks. To add a heading, enter the `=`
character and to emphasize some text with italics, enclose it in
`[_underscores_]`.

```example
= Introduction
In this report, we will explore the
various factors that influence _fluid
dynamics_ in glaciers and how they
contribute to the formation and
behavior of these natural structures.
```

That was easy! To add a new paragraph, just add a blank line in between two
lines of text. If that paragraph needs a subheading, produce it by typing `==`
instead of `=`. The number of `=` characters determines the nesting level of the
heading.

Now we want to list a few of the circumstances that influence glacier dynamics.
To do that, we use a numbered list. For each item of the list, we type a `+`
character at the beginning of the line. Typst will automatically number the
items.

```example
+ The climate
+ The topography
+ The geology
```

If we wanted to add a bulleted list, we would use the `-` character instead of
the `+` character. We can also nest lists: For example, we can add a sub-list to
the first item of the list above by indenting it.

```example
+ The climate
  - Temperature
  - Precipitation
+ The topography
+ The geology
```

## Adding a figure { #figure }
You think that your report would benefit from a figure. Let's add one. Typst
supports images in the formats PNG, JPEG, GIF, and SVG. To add an image file to
your project, first open the _file panel_ by clicking the box icon in the left
sidebar. Here, you can see a list of all files in your project. Currently, there
is only one: The main Typst file you are writing in. To upload another file,
click the button with the arrow in the top-right corner. This opens the upload
dialog, in which you can pick files to upload from your computer. Select an
image file for your report.

![Upload dialog](1-writing-upload.png)

We have seen before that specific symbols (called _markup_) have specific
meaning in Typst. We can use `=`, `-`, `+`, and `_` to create headings, lists
and emphasized text, respectively. However, having a special symbol for
everything we want to insert into our document would soon become cryptic and
unwieldy. For this reason, Typst reserves markup symbols only for the most
common things. Everything else is inserted with _functions._ For our image to
show up on the page, we use Typst's [`image`]($func/image) function.

```example
#image("glacier.jpg")
```

In general, a function produces some output for a set of _arguments_. When you
_call_ a function within markup, you provide the arguments and Typst inserts the
result (the function's _return value_) into the document. In our case, the
`image` function takes one argument: The path to the image file. To call a
function in markup, we first need to type the `#` character, immediately
followed by the name of the function. Then, we enclose the arguments in
parentheses. Typst recognizes many different data types within argument lists.
Our file path is a short [string of text]($type/string), so we need to enclose
it in double quotes.

The inserted image uses the whole width of the page. To change that, pass the
`width` argument to the `image` function. This is a _named_ argument and
therefore specified as a `name: value` pair. If there are multiple arguments,
they are separated by commas, so we first need to put a comma behind the path.

```example
#image("glacier.jpg", width: 70%)
```

The `width` argument is a [relative length]($type/relative-length). In our case,
we specified a percentage, determining that the image shall take up `{70%}` of
the page's width. We also could have specified an absolute value like `{1cm}` or
`{0.7in}`.

Just like text, the image is now aligned at the left side of the page by
default. It's also lacking a caption. Let's fix that by using the
[figure]($func/figure) function. This function takes the figure's contents as a
positional argument and an optional caption as a named argument.

Within the argument list of the `figure` function, Typst is already in code mode. This means, you can now remove the hashtag before the image function call.
The hashtag is only needed directly in markup (to disambiguate text from function calls).

The caption consists of arbitrary markup. To give markup to a function, we
enclose it in square brackets. This construct is called a _content block._

```example
#figure(
  image("glacier.jpg", width: 70%),
  caption: [
    _Glaciers_ form an important part
    of the earth's climate system.
  ],
)
```

You continue to write your report and now want to reference the figure. To do
that, first attach a label to figure. A label uniquely identifies an element in
your document. Add one after the figure by enclosing some name in angle
brackets. You can then reference the figure in your text by writing an `[@]`
symbol followed by that name. Headings and equations can also be labelled to
make them referenceable.

```example
Glaciers as the one shown in
@glaciers will cease to exist if
we don't take action soon!

#figure(
  image("glacier.jpg", width: 70%),
  caption: [
    _Glaciers_ form an important part
    of the earth's climate system.
  ],
) <glaciers>
```

<div class="info-box">

So far, we've passed content blocks (markup in square brackets) and strings
(text in double quotes) to our functions. Both seem to contain text. What's the
difference?

A content block can contain text, but also any other kind of markup, function
calls, and more, whereas a string is really just a _sequence of characters_ and
nothing else.

For example, the image function expects a path to an image file.
It would not make sense to pass, e.g., a paragraph of text or another image as
the image's path parameter. That's why only strings are allowed here.
On the contrary, strings work wherever content is expected because text is a
valid kind of content.
</div>

## Adding a bibliography { #bibliography }
As you write up your report, you need to back up some of your claims. You can
add a bibliography to your document with the
[`bibliography`]($func/bibliography) function. This function expects a path
to a bibliography file.

Typst's native bibliography format is
[Hayagriva](https://github.com/typst/hayagriva/blob/main/docs/file-format.md),
but for compatibility you can also use BibLaTeX files. As your classmate has
already done a literature survey and sent you a `.bib` file, you'll use that
one. Upload the file through the file panel to access it in Typst.

Once the document contains a bibliography, you can start citing from it.
Citations use the same syntax as references to a label. As soon as you cite a
source for the first time, it will appear in the bibliography section of your
document. Typst supports different citation and bibliography styles. Consult the
[reference]($func/bibliography.style) for more details.

```example
= Methods
We follow the glacier melting models
established in @glacier-melt.

#bibliography("works.bib")
```

## Maths { #maths }
After fleshing out the methods section, you move on to the meat of the document:
Your equations. Typst has built-in mathematical typesetting and uses its own
math notation. Let's start with a simple equation. We wrap it in `[$]` signs
to let Typst know it should expect a mathematical expression:

```example
The equation $Q = rho A v + C$
defines the glacial flow rate.
```

The equation is typeset inline, on the same line as the surrounding text. If you
want to have it on its own line instead, you should insert a single space at its
start and end:

```example
The flow rate of a glacier is
defined by the following equation:

$ Q = rho A v + C $
```

We can see that Typst displayed the single letters `Q`, `A`, `v`, and `C` as-is,
while it translated `rho` into a Greek letter. Math mode will always show single
letters verbatim. Multiple letters, however, are interpreted as symbols,
variables, or function names. To imply a multiplication between single letters,
put spaces between them.

If you want to have a variable that consists of multiple letters, you can
enclose it in quotes:

```example
The flow rate of a glacier is given
by the following equation:

$ Q = rho A v + "time offset" $
```

You'll also need a sum formula in your paper. We can use the `sum` symbol and
then specify the range of the summation in sub- and superscripts:

```example
Total displaced soil by glacial flow:

$ 7.32 beta +
  sum_(i=0)^nabla Q_i / 2 $
```

To add a subscript to a symbol or variable, type a `_` character and then the
subscript. Similarly, use the `^` character for a superscript. If your
sub- or superscript consists of multiple things, you must enclose them
in round parentheses.

The above example also showed us how to insert fractions: Simply put a `/`
character between the numerator and the denominator and Typst will automatically
turn it into a fraction. Parentheses are smartly resolved, so you can enter your
expression as you would into a calculator and Typst will replace parenthesized
sub-expressions with the appropriate notation.

```example
Total displaced soil by glacial flow:

$ 7.32 beta +
  sum_(i=0)^nabla
    (Q_i (a_i - epsilon)) / 2 $
```

Not all math constructs have special syntax. Instead, we use functions, just
like the `image` function we have seen before. For example, to insert a column
vector, we can use the [`vec`]($func/math.vec) function. Within math mode,
function calls don't need to start with the `#` character.

```example
$ v := vec(x_1, x_2, x_3) $
```

Some functions are only available within math mode. For example, the
[`cal`]($func/math.cal) function is used to typeset calligraphic letters
commonly used for sets. The [math section of the reference]($category/math)
provides a complete list of all functions that math mode makes available.

One more thing: Many symbols, such as the arrow, have a lot of variants. You can
select among these variants by appending a dot and a modifier name to a symbol's
name:

```example
$ a arrow.squiggly b $
```

This notation is also available in markup mode, but the symbol name must be
preceded with `#sym.` there. See the [symbols section]($category/symbols/sym)
for a list of all available symbols.

## Review { #review }
You have now seen how to write a basic document in Typst. You learned how to
emphasize text, write lists, insert images, align content, and typeset
mathematical expressions. You also learned about Typst's functions. There are
many more kinds of content that Typst lets you insert into your document, such
as [tables]($func/table), [shapes]($category/visualize), and
[code blocks]($func/raw). You can peruse the [reference]($reference) to learn
more about these and other features.

For the moment, you have completed writing your report. You have already saved a
PDF by clicking on the download button in the top right corner. However, you
think the report could look a bit less plain. In the next section, we'll learn
how to customize the look of our document.
